Rapid Curing RC3000

Rapid Curing RC3000 from Benzene International Pte Ltd

By: Benzene International Pte Ltd  02/07/2012

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen. The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied. Cutback Classification Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.


Contact Benzene International Pte Ltd

Email

Print this page

Share

Other products and services from Benzene International Pte Ltd

Polymer Modified Bitumen from Benzene International Pte Ltd thumbnail
17/03/2014

Polymer Modified Bitumen

Modified Bitumen Introduced in Eighties to combat with common pavement distress. There are about 4 different specifications based on type of modifier used similar to ASTM specifications for modified bitumen. Many Authorities advises for use of minimum 10% modified Bitumen.


Bitumen Emulsion from Benzene International Pte Ltd thumbnail
05/02/2013

Bitumen Emulsion

Bitumen Sales


Palm Oil from Benzene International Pte Ltd thumbnail
03/01/2013

Palm Oil

Palm Oil - Vegetable Oil For Sales


Base Oil from Benzene International Pte Ltd thumbnail
20/12/2012

Base Oil

Base Oil SN150


Bitumen Emulsion SS-1K from Benzene International Pte Ltd thumbnail
27/09/2012

Bitumen Emulsion SS-1K

Description Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain


Bitumen Class 320 from Benzene International Pte Ltd thumbnail
14/09/2012

Bitumen Class 320

Class 170 is widely used in sprayed sealing and light asphalt applications to provide durability and fatigue resistance. It is also used to manufacture cutback bitumen, bitumen emulsions and modified bitumen. Class 320 is most commonly used to manufacture asphalt mixes while Class 600 is primarily used to manufacture extra heavy-duty asphalt pavements that need to endure substantial traffic loadings.


Bitumen Class 320 from Benzene International Pte Ltd thumbnail
14/09/2012

Bitumen Class 320

Description Paving grade bitumen manufactured to a tighter specification than prescribed in AS 2008 and is suitable for standard sealing and lightly trafficked asphalt applications. Bitumen used in road construction and maintenance are refined and blended to meet strict road engineering requirements and industry specifications. Paving grade bitumen’s are categorised according to viscosity (degree of fluidity) gradings.


Bitumen Class 170 from Benzene International Pte Ltd thumbnail
14/09/2012

Bitumen Class 170

Paving grade bitumen manufactured to a tighter specification than prescribed in AS 2008 and is suitable for standard sealing and lightly trafficked asphalt applications


02/07/2012

Bitumen Emulsion SS1-K in Singapore

Description Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. Uses Cationic emulsions may be used at ambient temperatures with aggregates, which need not


Medium curing bitumen MC3000 from Benzene International Pte Ltd thumbnail
02/07/2012

Medium curing bitumen MC3000

Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.


Rapid Curing RC70 from Benzene International Pte Ltd thumbnail
21/06/2012

Rapid Curing RC70

This Division handles all Petroleum based products, refined from Hydro-carbon cracking with special attention to Bitumen.


Cutback Bitumen MC30 Sales from Benzene International Pte Ltd thumbnail
21/06/2012

Cutback Bitumen MC30 Sales

Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.


Medium Curing MC 30 sales from Benzene International Pte Ltd thumbnail
21/06/2012

Medium Curing MC 30 sales

To Provide Efficient and Cost Effective Products and Services.


30/05/2012

Penetration Grade Bitumen 60/70

Penetration Grade Bitumen is commonly used in road surfacing, and some industrial applications. Additional processing yields other grades of bitumen products and their application.