Shim Stock

Shim Stock from DEPCOM INTERNATIONAL

By: DEPCOM INTERNATIONAL  03/07/2012
Keywords: Shim Stock

Shims are used as an effective means of filling gaps between two surfaces. Shims are manufactured to very precise thicknesses from .001" to .25" or 0.01 mm to 3.00 mm. Shims are available in Carbon Steel, Brass, Aluminium, Plastic and Stainless Steel 304 and 316. Shims are available in the form of Rolls, Sheets, Pre-cut slotted or in Kit forms. Shim Kits are available in Full Kits, Starter Kits, Mini Kits and Installer Kits. 

Keywords: Shim Stock

Contact DEPCOM INTERNATIONAL

Email

Print this page

Share

Other products and services from DEPCOM INTERNATIONAL

Shim Kits from DEPCOM INTERNATIONAL thumbnail
03/07/2012

Shim Kits

Shims are used as an effective means of filling gaps between two surfaces.


Quarter Turn Fastener from DEPCOM INTERNATIONAL thumbnail
21/07/2011

Quarter Turn Fastener

  A Quarter Turn assembly typically consists of a stud, a washer (optional) and a receptacle. The choice of a stud is usually dependent on the total material thickness.


Gauge Block from DEPCOM INTERNATIONAL thumbnail
21/07/2011

Gauge Block

 r Block Gauges are available in two degrees of tolerance, with grade 0 for calibration and grade 1 for inspection. Materials available are steel and ceramic. Our Block Gauges are usually sold in a standard set but are available in single units